Cement Silo Aeration Pads are pneumatic homogenizers for powder storage tanks for feeding or mixing powdered materials.
Suitable for different types of raw material silos, storage silos and mixing and homogenizing silos.
There are four main categories: rectangle, right-angled trapezoid, isosceles trapezoid and special-shaped. It is an indispensable equipment for cement production, raw material storage and mixing.
Cement silo aeration pad
• Top quality
• Reliable performance
• mute
• Easy to maintain
• well mixed
Cement silo aeration pad parameters
• Mixed material: dry powder, allowable surface water content: <1%;
• Air permeability: <3m3/m2·min;
• Air pressure: < 4kg/cm2;
• Resistance of breathable layer: <1200Pa;
• Breathable Material: Synthetic Polyester Hybrid Breathable Layer.
| Technical Parameter Silo Aeration Pad | |
| Applicable Material | Dry Powder material with water content ≤1% |
| Air Permeability | ≤3m3/m2/min |
| Air Pressure | ≤4kg/cm2 |
| Resistance of Fabrics | ≤1200Pa |
| Material of Fabrics | Synthetic Fibers with Polyester |
Arrangement, shape and installation
When doing the design work of the silo pneumatic homogenization system.
The coverage area of the aeration pad in the homogeneous zone should be as large as possible.
AGICO offers a choice of six basic aeration pad arrangements
Type A and B layouts are suitable for cement or raw material homogenization bins with a diameter of less than 12M
The annular aeration pad arrangement is installed obliquely at the bottom of the silo cement, while the central aeration pad is installed horizontally.
Type C is suitable for cement or raw material homogenization bins with a diameter of more than 12M
The annular aeration pad arrangement is installed obliquely at the bottom of the silo cement, while the central aeration pad is installed horizontally.
Type D is suitable for all kinds of cement or raw material storage bins
The annular aeration pad arrangement is installed obliquely at the bottom of the silo cement, while the central aeration pad is installed horizontally but with a smaller central area.
Type E is suitable for various cement or raw material storage bins and mixing bins
The annular aeration pad arrangement is installed obliquely at the bottom of the silo cement, while the central aeration pad is installed horizontally.
Type F is suitable for various cement or raw material mixing bins
All aeration chambers are installed horizontally.
The six basic arrangement methods have their own advantages, disadvantages and applicable scope. The designer and user should choose the appropriate arrangement method according to the actual situation.
The need for the number of aeration pads should be based on the actual situation, but the requirement of four, six, eight or twelve pads must be followed.